EMIRAcle Publications

  • A basic KM system for the VRL KCiP
  • Knowledge Management in Process Planning
  • A holistic approach to manufacturing system design
  • The Holistic Product and Service Lifecycle Approach and its influence on the Modern Manufacturing Paradigm
  • The Holistic Product and Service Life Cycle Approach and its influence on the Modern Manufacturing Paradigm: Management, Manufacturing and End of Life Systems
  • Formulating an expertise map in the VRL-KCiP
  • TRIZ for systems architecting
  • Use of models in conceptual design
  • Chaordic Systems Thinking for Novelty in Contemporary Manufacturing
  • Molecular Dynamics Simulations of Laser Ablation: The Morse Potential Function Approach
  • Nanomanufacturing Processes and Simulation: A Critical Review
  • MODERN MANUFACTURING STRUCTURES IN A NETWORK ENVIRONMENT
  • Manufacturing company as a network operating structure
  • RECONFIGURABLE MANUFACTURING NETWORK: AN EDUCATIONAL TEST-BED
  • TRENDS IN AWJ MINIATURIZATION AND ITS APPLICATIONS
  • AN ALTERNATIVE MICROTOOLING STRATEGY FOR REPLICATION PROCESSES
  • THE B2MN APPROACH TO MANUFACTURING NETWORK MODELING
  • PERFORMANCE EVALUATION OF SHOP FLOOR OPERATIONS EMPIRICAL APPROACH
  • AUTONOMOUS WORK SYSTEMS IN MANUFACTURING NETWORKS
  • Distributed modeling of networked manufacturing systems
  • THE CHALLENGE OF NEW TECHNOLOGIES FOR STUDENTS INNOVATION PROJECTS â¿¿ THE CASE OF A WEB MACHINING SERVICE
  • a framework for novelty creation
  • PREDICTION OF A SINGLE IMPACT CRATER SHAPE IN AWJ MACHINING USING FEA
  • On the use of principal component analysis for identifying and monitoring geometric profiles
  • The Professional and Management Competences Evaluation as Part of Project Memory
  • Romanian Research Network for Integrated Product and Process Engineering
  • Development of Promise Data Sctructure
  • INTRODUCING VIRTUALITY IN PROJECT-BASED LEARNING - THE CASE OF A VIRTUAL CNC MACHINE-TOOL
  • The PPO design model with respect to digital enterprise technologies among product life cycle
  • A new concept for collaborative product & process design within a human-oriented Collaborative Manufacturing Environment
  • NEW BUSINESS REQUIREMENTS IN THE KNOWLEDGE BASED SOCIETY
  • A Rolling Horizon Approach to Plan Outsourcing in Manufacturing-to-Order Environments Affected by Uncertainty
  • Connection of business dedicated tools within an environment of collaborative design
  • An environment for collaborative design: A New Approach to CAD Tool Interoperability
  • A dynamic multi-view product model to share product behaviours among designers: how process model adds semantic to the behaviour paradigm
  • Dispatching policy for manufacturing jobs and time-delay plots
  • An anticipated notification scheme to ensure coherency of a collaborative design framework
  • Toward a framework for effective collaborative product development
  • A Theoretical and Experimental Investigation on Limitations of Pulsed Laser Drilling
  • NETWORKS OF EXCELLENCE AS VIRTUAL COMMUNITIES
  • Knowledge Management for a Cooperative Design System
  • New business requirements in the knowledge based society
  • Setup Error Adjustment: Sensitivity Analysis and a New MCMC rule
  • PERFORMANCE ASSESSMENT OF MANUFACTURING WORK SYSTEMS BASED ON DATA MINING
  • MANUFACTURING MINIATURIZED PARTS WITH ABRASIVE WATER JET â¿¿ A CASE STUDY
  • A TWO-DIMENSIONAL CELLULAR AUTOMATA MODEL OF ABRASIVE WATER JET CUTTING
  • MINIATURIZATION OF THE INJECTION ABRASIVE WATER JET MACHINING PROCESS
  • A NEW STRUCTURE OF AN ADAPTABLE MANUFACTURING SYSTEM BASED ON ELEMENTARY WORK UNITS AND NETWORK INTEGRATION
  • METHODS AND TOOLS FOR EFFICIENT COORDINATION AND COMMUNICATION IN AN INDUSTRIAL CLUSTER
  • THE ROLE OF A PURCHASE PROCESS IN THE ENGINEER-TO-ORDER MANUFACTURING ORGANIZATION
  • THE VERSATILITY OF ABRASIVE WATER-JET MACHINING IN THE TOOLMAKING INDUSTRY
  • Development of a web-based collaboration platform for manufacturing product and process design evaluation using virtual reality techniques
  • Effect of plasma nitriding and chrome plating treatments on repair welding performance of moulds
  • Optimisation of production rate in diode laser hardening
  • Effect of dual beam on reduction of porosity in CO2 laser welding
  • Identification of Manufacturing Processes Signature by a Principal Component Based Approach
  • Thermal analysis of Grind-Hardening Process
  • Multi-Criteria Upper Body Human Motion Adaptation
  • A Prototype Virtual Reality Based Demonstrator for Immersive and Interactive Simulation of Welding Processes
  • Critical issues in detecting out-of-control samples in Customer Satisfaction Surveys
  • On Optimal Design Limitations of Generalized Two-Mirror Remote Beam Delivery Laser Systems: The case of remote Welding
  • Similarities of high and low levels of production with respect to assignments and solution techniques
  • Cost-oriented stamping material and tolerance optimization
  • A CAD module for automatically generating complex sink-in shapes for aluminium extrusion dies
  • An empirical study of engineering knowledge dynamics in a design situation
  • a way to manage calculation engineers
  • â¿¿What-If-design
  • Design for Dynamic Use Situations, First Steps in the Development of a Design Method that supports Designing for Dynamic Use Situations
  • The (development) life cycle for packaging and the relation to product design
  • Combined assesssment methods for decision support in product development
  • Parallel Mixed-Model Assembly Lines for Efficient Operations and Cost Reduction
  • Linear Programming and Genetic Algorithms Methods for Creation of Groups in Networks of Excellence
  • Virtual Research Lab: A New Way To Do Research
  • Incorporating Lifecycle Considerations in Axiomatic Design
  • Dynamic Life Cycle Performance Simulation of Production Systems
  • Dynamic Life Cycle Control of Integrated Manufacturing Systems using Planning Processes Based on Experience Curves
  • MESH RECONSTRUCTION METHODS UTILIZING object geometry and topology for non-contact inspection techniques
  • A Life Cycle Cost Calculation and Management System for Machine Tools
  • Measuring Strategy Definition for Flatness: a case study
  • National Research Network for Integrated Product and Process Engineering, INPRO
  • RECONFIGURABILITY OF MANUFACTURING SYSTEMS FOR AGILITY IMPLEMENTATION â¿¿ PART II: TWO ARCHITECTURES
  • Opportunities and challenges for connecting environmental assessment and CAD software tools: example of implementation by Legrand
  • New approach for the end of life oriented product conceptual design
  • Proposal of a new Design Methodology including PD and SBD in Minimally Invasive Surgery
  • First Proposals of scenario analysis model for surgical tools innovative Design
  • Proposal of a new Design Methodology in the Surgical Domain
  • AI techniques in modelling, assignment, problem solving and optimisation
  • Integration of production-, quality- and process monitoring for agile manufacturing
  • Modelling and Simulating of Distributed Development Processes of Mechatronic Products by Means of Petri Nets.
  • The Future of Product Development. Proceedings of the 17th CIRP Design Conference, Berlin, 27.-28.03.2007
  • AI techniques in modelling, assignment, problem solving and optimisation
  • Water jet based tooling strategies for microproduction
  • Logistic Regression Analysis for Experimental Determination of Forming Limit Diagrams
  • Ontology and expertise map building in VO - The case of VRL-KCiP
  • Implementation of a light knowledge sharing tool in engineering design
  • Assessment of surface quality on textured FDM prototypes
  • Problems in laser repair-welding a surface-treated tool steel
  • A generic architecture to synchronise design models issued from heterogeneous business tools : towards more interoperability between design expertises
  • The influence of operator skills, process parameters and materials on clad shape in repair using laser cladding by wire
  • A statistical tool for the analysis of Student Satisfaction questionnaires
  • Development of the semantic object model for a PDKM System
  • Proposal of a PLM standard for mass products
  • Digital humans for virtual assembly evaluation
  • Optimal reconfiguration policy to react to product changes
  • An analytical model of laser clad geometry
  • Impact of Ramp-Up on the Optimal Reconfiguration Policy for modern production systems
  • A case study in profile tolerance measurement
  • The effect of Pressure Fluctuation on the Cutting Ability of Pure Waterjet
  • DESYMA - Assessing flexibility for the lifecycle of manufacturing systems
  • Setup Adjustment of Multiple Lots Using a Sequential Monte Carlo Method
  • Numerical and experimental study of transferred arc in argon
  • An approach to human motion analysis and modelling
  • Experimental and numerical study of the tool in water jet incremental sheet metal forming
  • A Framework for Computational Design Synthesis: Model and Applications
  • Characteristics of MEDM Electrodes Made with Water Jet Machining
  • Virtual Product Development as an Engine for Innovation
  • The Application of a Statistical Design of Experiment for Quantitative Analysis and Optimisation of Development Processes
  • Competence Management for the Optimisation of Product Development Processes
  • A CONCEPTUAL FRAMEWORK FOR COLLABORATIVE DESIGN AND OPERATIONS OF MANUFACTURING WORK SYSTEMS
  • Unâ¿¿applicazione di materiali a memoria di forma per lâ¿¿incremento dello smorzamento strutturale di archetti di pantografi per alta velocità
  • Misura ottica di velocità ultrasonica di getti d
  • Un ambiente open source object-oriented per la simulazione di sistemi di produzione manifatturieri
  • Protocollo innovativo di collaudo per macchine utensili speciali
  • Diagnosi di sistemi fluidodinamici per via elettrica
  • Un approccio alla specificazione generativa di tolleranze dimensionali e geometriche
  • Con la potenza di una lampadina
  • Study of the validity of the Niyama criteria function applied to the alloy AlSi7Mg
  • Tempra superficiale
  • Trattamento superficiale di giunti in acciaio duplex mediante laser a diodi
  • Real time factory cockpit - A system for integrated factory planning and control for SME´s
  • PERFORMANCE EVALUATION OF LONG PRODUCTION LINE WITH GENERAL REPAIR TIMES AND MULTIPLE FAILURE MODES
  • Sharp Feature Detection for Inspection
  • eSCM: a web-based institute for sharing knowledge and competencies in the educational area of supply-chain management
  • New approaches for "advanced Manufacturing Engineering"
  • Agent-based product life cycle data support
  • The Professional and Management Competences Evaluation as Part of Project Memory
  • A new model for synchronous production between clients and subcontractors
  • Kinematic design and description of industrial robotic chains
  • eSCM: Education on supply-chain management on graduate level and within corporations
  • A group theory approach for assembly/disassembly mechanical simulation
  • Experimental investigation of water jet orifice efficiency by a novel laser doppler velocimetry technique
  • Curves reconstruction using regression spline
  • An introduction to Bayesian Interference in process monitoring, control and optimization
  • Analytical approach to estimate the minimum 3D position deviation of a hole due to fixturing
  • Effects of water velocity and orifice geometry on water jet cutting performance
  • Water jet system characterization, monitoring and control based on pump motor power signal analysis
  • An efficient approach to human motion modeling for the verification of human-centric product design and manufacturing in virtual environments
  • Effects of diamond orifice geometry on water jet cutting performance
  • Positioning of vent holes on sheet metal dies
  • Plan Construction and Optimization in a Multi-Agent Framework for Computer-Aided Process Planning
  • A Shared VE for Collaborative Product Development in Manufacturing Enterprises
  • Comparative studies of control charts for torque data in automotive component assembling
  • Determinazione di parametri per la definizione di un algoritmo diagnostico per un sistema water jet
  • Bayesian Process Monitoring, Control and Optimization
  • A way to foster knowledge sharing in engineering design SMEs
  • A Decomposition Method to Support Evaluation and Continuous Improvement of Reconfigurable Manufacturing System Performance
  • Product Lifecycle Management and Information Tracking using Smart Embedded Systems
  • Analysis of models for solutions in service/product engineering
  • Compatibility knowledge in fuzzy front end
  • â¿¿Sustainableâ¿¿ products? Necessity for an overall design approach
  • A representation of a product-service system during the design phase, A case study of a helium liquefier
  • A novel approach to DFM in toolmaking: a case study
  • Integrated design of micro electro mechanical systems
  • Computer-aided assembly planning for the diemaking industry
  • A novel powder metallurgy-based method for the recycling of aluminum adapted to a small island developing state in the Pacific.
  • A Classification of Design Theories and Methodologies
  • Fatigue Behaviour of tensile-shear loaded clinched joints
  • A Simulation-Based Hybrid Backwards Scheduling Framework for Manufacturing Systems
  • Impact of Quality Control on Production Systems Performance
  • Geometric Tolerance Evaluation: a Discussion on Minimum Zone Fitting Algorithms
  • Analisi della struttura organizzativa degli erogatori del servizio di assistenza domiciliare
  • Modular virtual prototyping of machine tools
  • Proposal of a PLM standard
  • Detecting out-of-control samples in customers
  • Using recurrent neural networks to detect changes in autocorrelated processes for quality monitoring
  • Integrated Analysis of Production Logistics and Quality Performance in Transfer Lines with Rework
  • Generation of design knowledge from product life cycle data
  • Formal verification in analysis and design of production systems
  • ANALYTICAL PERFORMANCE EVALUATION OF SMALL FLOW LINES WITH SHARED BUFFER
  • An Approach to Planning of Food Industry Manufacturing Operations: A Case Study
  • An integrated VR-based simulation environment for the assessment of process and human factors in assembly
  • VR-based methods and developments for assembly verification
  • Theoretical and Experimental Investigation of Pulsed Laser Grooving Process
  • Investigation of Laser cutting quality of Aluminium
  • An experimental investigation of remote welding with CO2 and Nd: YAG laser-based systems
  • Products Adapted to Remanufacturing Strategies
  • Common representation of products and services: a necessity for engineering designers to develop Product Service Systems, In The future of product development
  • Automatic Generation of Loop Closing Constraint Equations for Rotational Joint
  • Alternatives to Design for Landfill : Design for Reuse, Recycle and Remanufacture
  • EDM process adaptation system in toolmaking industry
  • Modern numerical methods in Bayesian Computation
  • A multi agent architecture for Home Care services
  • Virtual assembly of dies for sheet metal body parts
  • Managing the Knowledge Supply Chain to Support Innovation
  • Knowledge Deployment: How to Use Design Knowledge
  • The Implementation of a Conceptual Framework Based Approach for the Improved Viewing and Utilisation of Organisational Information.
  • Directions of Next Generation Product Development
  • Process analysis and flexible transfer lines configurations
  • On the simulation of roundness profiles obtained by turning
  • An Experimental Investigation of the Kerf Realised by AWJ: the Influence of Pressure Fluctuations
  • Performance Evaluation of Production Systems Monitored by Statistical Process Control (SPC) and Off-Line Inspections
  • An approach to design the flexibility degree in flexible manufacturing systems
  • A Stochastic approach to the FMS Loading Problem
  • An Analytical Method to Support the Design of Production Systems Monitored by Statistical Process Control
  • Architecture approach for the Short Time Production Planning of Flexible Manufacturing Cell Systems
  • AUTOMATIC PARTITIONING OF PROBLEMS THROUGH SUBMODEL DECOMPOSITIONâ¿¿A PROMISING TECHNIQUE OF DIGITAL ENTERPRISE TECHNOLOGY
  • A Home Care Scheduling Model For Human Resources
  • IMPROVING PRODUCT INNOVATION BY UTILIZING FORMAL INNOVATION MODELS TO SUPPORT AND GUIDE INDUSTRY INNOVATION PROJECTS
  • Integrated design decision support and logistics strategy
  • A bottom-up approach for automated synthesis support in the engineering design process:
  • Education in Manufacturing Technology & Science: A view on Future Challenges & Goals
  • Modern Automotive Assembly Technologies: Status and Outlook
  • Ergonomic evaluation of virtual assembly tasks
  • Design(er) support based on Conceptual Frameworks
  • Life-cycle Dependency of Models for Product Development Processes
  • Tolerance specification through automated generation of assembly requirements
  • Introducing the roadmap concept to inexperienced users: a case study
  • Distributed Autonomous Agents, Navigation and Cooperation with Minimum Intelligence in a Dynamic Warehouse Application
  • Abduction for Creative Design
  • Structuring Design Knowledge for Better Design Synthesis
  • Service Explorer â¿¿A Tool for Service Design
  • Life Cycle Simulation of Products in a Competitive Market
  • Life Cycle Simulation for Analyzing Product Service Systems
  • A Multi-Objective Reconfiguration Method of Supply Chains through Discrete Event Simulation
  • A Design Methodology of Services
  • Knowledge Structure and Complexity of Multi-Disciplinary Design
  • A Comparative Study of Models of Remarketing
  • Ricostruzione laser una valida alternativa
  • Organizing and running real-time, cooperative enterprises
  • A ROADMAPPING AND CONCEPTUAL FRAMEWORK BASED APPROACH FOR EFFICIENT KNOWLEDGE AND INNOVATION MANAGEMENT
  • IMPROVED UTILISATION OF ORGANISATIONAL DATABASES USING A CONCEPTUAL FRAMEWORK APPROACH
  • Simulation Approaches to Optimise the Management of Product Development Processes
  • VRL-KCiP - Virtual Research Lab for a Knowledge Community in Production.
  • Physical Concept Ontology for the Knowledge Intensive Engineering Framework
  • Simulation of Product Development Processes
  • Knowledge Structuring for Function Design
  • Development of Design Methodology for Upgradable Products based on Function-Behavior-State Modeling
  • Development of Service-Oriented Products Based on the Inverse Manufacturing Concept
  • Network of Excellence "VRL-KCiP" bundels European Competence for Production Sciences
  • Agent-Based Systems for Manufacturing
  • Kalis, a tool linking information and activities in order to make engineering knowledge sharable
  • VIDA Centre and DZ-ViPro Berlin - twinning project in VR area
  • Integration of experimental and computational analysis in the product development and proposals for the sharing of technical knowledge
  • The use of virtual reality techniques during the design process: from the functional definition of the product to the design of its structure
  • A tool to implement sustainable end-of-life strategies in the product development phase
  • Integrated design of remanufacturable products based on product profiles
  • Stampi nitrurati o cromati
  • Riparazione laser di stampi nitrurati o cromati
  • Taglio di tubi: la soluzione laser
  • Conceptual maps based system to capture knowledge in distributed collaborative R&D projects
  • Position deviation of a holes pattern due to six-point locating principle
  • INTEGRATED ANALYSIS OF PRODUCTION LOGISTICS AND QUALITY PERFORMANCE IN TRANSFER LINES WITH REWORK
  • Towards a framework for managing conceptual knowledge in distributed and collaborative R&D projects
  • Connecting CAD and PLM systems with ecodesign software: Current experiences and future opportunities.
  • Computer aided process planning, strategy, and models in the aircraft industry
  • Case Study: The Implementation of a Radical Innovation Project
  • Improved Utilisation of Organisational Documents using a Conceptual Framework
  • Operations management related activities in home health care structures
  • TOWARD INNOVATION CAPABILITY MATURITY
  • The Knowledge Supply Chain and Innovation Management
  • A simulation framework for assembly/disassembly process modelling
  • Modélisation cinématique des robots mobiles par visio-algorithme
  • Proposal of a New Design Methodology in the Surgical Domain
  • NEW APPROACH TO ASSEMBLY PROCESS VISUALIZATION AT VIDA CENTRE
  • Life Cycle Controlling for Manufacturing Systems
  • Remote monitoring and control of work systems
  • Building Virtual Teams in Research and Development Field of Activity. The Case of INPRO Virtual Network
  • ECO DESIGN IN PRACTICE
  • Kinematic modelling of mobile robots by vision based algorithm
  • Coordination and cooperation in production networks
  • Proposal of a New Design Methodology including PD and SBD in Minimally Invasive Surgery
  • An observational study of multi-disciplinary co-design - application to an electromechanical device.
  • Representation and Navigation Techniques for Semi-Structured Knowledge in Collaborating Communities
  • Towards a scenario analysis for the design of surgical tools
  • Chaordic Systems Thinking for Novelty in Contemporary Manufacturing
  • Coordination of product design and production planning in supply networks: The case in customized mass production
  • The Application of a Statistical Design of Experiment for Quantitative Analysis and Optimisation of Development Processes
  • Virtual Product Development as an Engine for Innovation
  • A new method for measuring the frequency of striation formation in abrasive water jet cutting
  • CONTROL OF MANUFACTURING SYSTEM BY AGENTS OF MATERALS, PARTS AND PRODUCTS
  • Water jet machined thin sheet metal electrodes for micro die-sinking EDM
  • Cheese rheology
  • A method of assistance to the topological choice of the actuators of the kinematic mechanisms in robotics
  • Contact identification for assembly/disassembly simulation with a haptic device
  • Kinematic design and description of industrial robotic chains
  • A group theory approach for assembly/disassembly mechanical simulation. Part 1¿ Formulation, International Journal of Pure and Applied Mathematics. 2007
  • Formulation for actuators' number enumeration for main planar structures in robotics
  • A new model for synchronous production between clients and subcontractors
  • A GROUP THEORY APPROACH FOR ASSEMBLY/DISASSEMBLY MECHANICAL SIMULATION: PART 2 ¿ APPLICATION FOR TRAJECTORY GENERATION
  • Modeling of the trajectories of assembly and dismantling associated with the working joints with products
  • Romanian Research Network for Integrated Product and Process Engineering
  • An empirical study of engineering knowledge dynamics in a design situation
  • Trends in Collaboration Applications for Virtual Design
  • HIGH VALUE ADDING VR TOOLS FOR NETWORKED CUSTOMER-DRIVEN FACTORY
  • Keeping Traces of Design Rationale through Intermediary Objects
  • Integration of experimental and computational analysis in the product development and proposals for the sharing of technical knowledge
  • A COLLABORATION PLATFORM FOR PRODUCT DESIGN EVALUATION, DEMONSTRATION AND CUSTOMIZATION
  • HIGH VALUE ADDING VR TOOLS FOR NETWORKED CUSTOMER-DRIVEN FACTORY
  • IMPLEMENTATION OF A LIGHT KNOWLEDGE SHARING TOOL IN ENGINEERING DESIGN
  • DiFac: Digital Factory for Human Oriented Production System
  • National Virtual Team¿s Management and Developemnt. The Case of Romanian Research Network - INPRO
  • Pro-Active Partnership in Reasearch for Integrated Product and Process Engineering
  • Managing Intra-national Virtual Team. The Case of Romanian Research Network ¿ INPRO
  • Installation of scenarios for the design of Minimally Invasive Surgerys' Tools
  • Platform for Collaborative Product and Processes Development
  • Improving product development by Design-for-X (DfX) Support
  • Comparison of material removal in micro and conventional EDM
  • Towards a real-time cooperative enterprise: Issues, solution concepts and lessons
  • The Application of a Statistical Design of Experiment for Quantitative Analysis and Optimisation of Development Processes
  • National Virtual Team's Management and Development. The Case of Romanian Research Network INPRO
  • Product ecodesign and materials: current status and future prospects.
  • Mechanical Design, Control Choices and first Return of Use of a Prosthetic Arm
  • EVALUATION OF MACHINING SYSTEM DYNAMIC STIFFNESS
  • VISUALIZATION OF THE WORK STAND ENVIRONMENT CONDITIONS USING VIRTUAL REALITY TECHNIQUES
  • EVALUATION OF MACHINING SYSTEM STATIC STIFFNESS
  • COMPUTER AIDED RECYCLING RATE ASSESSMENT
  • The concept of self-maintained offshore wind turbines
  • Retracting and seeking movements during laparoscopic goal-oriented movements. Is the shortest path length optimal?
  • Fault diagnosis system for an offshore wind turbine using qualitative physics
  • Functional Redundancy in Offshore Wind Turbine Design
  • Collaborative Engineering
  • A More Realistic Cutting Force Model at Uncut Chip Thickness Close to Zero
  • Influence of the accuracy of the chip thickness computation upon the precision of time domain simulation of the dynamic cutting,
  • Influence of the cutting tool geometrical defects on the dynamic behaviour of machining
  • Modelling the vibratory drilling process to foresee cutting parameters
  • Process planning strategy based on fixturing indicators evaluation
  • Surface shape prediction in high speed milling
  • Impact of the cutting dynamics of small radial immersion milling operations on machined surface roughness
  • Influence of the dynamic behaviour on the quality of a milling surface in HSM
  • Usability of Hybrid, Physical and Virtual Objects for Basic Manipulation Tasks in Virtual Environments
  • The issues and benefits of an intelligent design observatory
  • An Information Maturity Framework for the Handling of Uncertainty within a Collaborative Design Team.
  • Social embodiment of technical devices Eyeglasses over the centuries and according to their uses
  • An environment for collaborative design: A New Approach to CAD Tool Interoperability
  • Toward non mature information management in collaborative design process.
  • MICA-Graph: a tool for managing text and sketches during design processes
  • Connection of business dedicated tools within an environment of collaborative design
  • Connection of business dedicated tools within an environment of collaborative design
  • Keeping Traces of Design Meetings through Intermediary Objects.
  • Green Machining
  • Generation of design knowledge from product life cycle data in KM book
  • Compatibility knowledge in fuzzy front end in KM book
  • high accuracy adaptive process planning for complex low rigidity parts
  • Integrating an expert user in the Design Process: How to make out surgeon needs during a new surgical instrument design; case study in Back Surgery
  • Engineering Design in surgery: An analyze model for prototype validation
  • MSc. in aerospace engineering
  • Reference Architectures as Knowledge Management Tools Guiding and Supporting Enterprise Engineering
  • An overview of academic developments in green value chain management
  • Fault Diagnosis approach based on a model-based reasoner and a functional designer for a wind turbine. An approach towards self-maintenance
  • The Knowledge Supply Chain and Innovation Management
  • How Has Reliability Of Technology Developed Through Time?
  • Complexity of Multi-Disciplinary Design
  • A methodology for Managing an Innovation Implementation Supported by Programme and Knowledge Management
  • TOWARD INNOVATION CAPABILITY MATURITY
  • Interation of a service CAD and a Life cycle simulator
  • Interation of a service CAD and a Life cycle simulator
  • Proposition of new recoverability indicators as support for the product design process: the electr(on)ic sector experience
  • How managing more efficiently substances in the design process of industrial products? An example from the aeronautics sector.
  • PREDICTING THE UNPREDICTABLE PROBLEMS IN MECHATRONICS DESIGN
  • Design at the cross-sections of Domains
  • Systems for tracking minimally invasive surgical instruments
  • The influence of experience and camera holding on laparoscopic instrument movements measured with the TrEndo tracking system
  • INVESTIGATION OF THE EFFECT OF MICROSTRUCTURES ON CGI MACHINING
  • Development of a Conceptual Reference Framework to Manage Manufacturing Knowledge Related to Products, Processes and Production Systems
  • A review of function modeling: Approaches and applications
  • MACHINING ONTOLOGY AND KNOWLEDGE MODELLING
  • EDEN¿
  • A Knowledge Network Approach Supporting the Value Chain
  • Control of manufacturing system by agents of materials, parts and products
  • A MULTI-VIEWPOINT MACHINE MODEL FOR EFFICIENT PRODUCTION DEVELOPMENT
  • Performance evaluation of linear and non-linear multi-product multi-stage lines with unreliable machines and finite homogeneous buffers
  • Improved Utilisation of Organisational Documents Using a Conceptual Framework
  • Improving Product Development Organizations using Knowledge Mining: Requirements, Methods and Tools
  • Holistic design of sustainable systems with improved lifecycle performance
  • Computer aided manufacturability analysis closing the CAD-CAM knowledge gap
  • A Hydrodynamic Modelling Framework for Production Networks
  • Macroscopic Modelling of long manufacturing lines
  • Modelling and Control of Production Networks Based on Road Network Traffic Management Methods
  • Functional Mock-Up
  • Presentation of IFF on the Hannover Messe (21.-25.04.2008)
  • Efficient Product Data Sharing in Collaboration Life Cycles
  • Actual and Future Needs for Collaborative Design Reviews
  • Trends in Collaboration Applications for virtual design
  • An integral machine functioning data management system for optimisation and decision support
  • Intelligent system and solutions for knowledge management in virtual research teams ¿ ontology and expertise map
  • Knowledge mining as a linking element in integrated engineering
  • Machine learning induction of a model for online parameter selection in EDM rough machining
  • Virtual Manufacturing Work Systems
  • Computer Aided Manufacturability Analysis: Closing the knowledge gap between the designer and the manufacturer
  • A holistic approach to manufacturing system design
  • Turning Performance Optimisation of Aeronautical Materials by Using High Pressure Cooling Technology
  • test1
  • Manufacturing process to repair bronze moulds using laser cladding
  • test

    •  

      

    Members

    Research Laboratories

    Publications

    Documents

    Collaborative Actions

     Expertise Tree